Cemedine Super X 8008 / SX720 / Gold No.777
- 1-Part, Quick cure - Pressure-sensitive - Elastic - Solvent-free
Special Features of Super X Series
Versatile adhesive for high performance bonding of numerous materials
Super X products are suitable for joining various types of plastics, rubbers, ceramics as well as different types of metals. This eliminates the need for selecting a particular adhesive for each type of material, as in the case of conventional adhesives.
High Durability
Super X does not peel off. Once materials are adhered, Super X provides durability in the range from low temperature (-60°C) to high temperature (120°C). Because of the rubber state of the hard film, the Super X sufficiently follows expansion, shrinkage and other changes of adherend
1-Part solventless adhesive with Fast curing at room temperature
Curing reaction is achieved by moisture absorbed from the air. Pressure-sensitive range is reached in this curing process about 10 min after application. If adherends are put together during this time, they bind instantly as in the case of rubber contact adhesive. This eliminates the need for temporary fixation. In short, this product is Easy-to-use, safe, clean, and one-part solventless that fast cures at room temperature.
Siloxane-free
Super X products are environmental friendly and do not use low molecular weight cyclosiloxane. (D3 to D10 Cyclosiloxane compound)
Usage & Applications
- For bonding application that requires initial rise strength.
- Suitable for bonding applications of dissimilar materials with different coefficients of thermal expansion.
- For bonding applications that require durability, such as thermal cycling.
- There are two ways to use: single sided and double sided.
Please use properly depending on the material and the conditions to be attached.
[Method 1: Single-sided application]
- For porous material.
- When the bonding area is small.
[Method 2: Double-sided application (like contact cement)]
- For non-porous materials such as metal, plastic and ceramic.
- When initial rising adhesion strength is required, such as warped parts, adhesion to vertical surfaces, adhesion of heavy materials, etc.
Properties of Cemedine Super X 8008
| Property | 8008 White | 8008 Black | 8008 L Black | 8008 LL Black | Clear | ||
|---|---|---|---|---|---|---|---|
|
Type |
One Part type Elastic Adhesive |
||||||
|
Standard |
Low Viscosity |
Clear |
|||||
|
Base |
Special polymer containing silyl group |
||||||
|
Appearance |
White paste |
Black paste |
Light yellow clear paste |
||||
|
Viscosity |
Pa.s/23°C |
85.0 |
85.0 |
22.0 |
19.0 |
82.6 |
|
|
Specific gravity |
g/cm3 |
1.27 |
1.27 |
1.25 |
1.22 |
1.07 |
|
|
Skin over time |
@23°C |
11 min |
11 min |
11 min |
12 min |
8.5 min |
|
|
Adhesive property |
Tensile shear adhesive strength |
MPa |
4.0 |
4.0 |
3.5 |
3.3 |
3.5 |
|
T-type peeling adhesive strength |
N/mm |
2.0 |
2.0 |
2.1 |
1.0 |
3.4 |
|
|
Curing Properties |
Hardness |
Shore A |
43 |
43 |
35 |
34 |
50 |
|
Glass transfer point |
°C |
-63 |
-63 |
-68 |
-59 |
-64 |
|
|
Breaking strength |
MPa |
2.5 |
2.5 |
1.3 |
0.9 |
4.0 |
|
|
Elongation at break |
% |
200 |
200 |
320 |
200 |
170 |
|
|
Electric Characteristics |
Volume resistivity |
Ω･cm |
1.1 x 10¹² |
4.7 x 10¹¹ |
1.2 x 10¹¹ |
1.0 x 10¹² |
1.3 x 10¹² |
|
Dielectric constant |
100Hz |
6.15 |
7.07 |
6.99 |
6.56 |
3.89 |
|
|
Dielectric loss tangent |
100Hz |
0.22 |
0.34 |
0.24 |
0.25 |
0.11 |
|
|
Grade |
RoHS ; JAIA |
||||||
|
Capacity |
170g / 333ml |
170g / 333ml |
170g / 333ml |
170g / 333ml |
135ml / 333ml |
||
Super X Gold No.777
Features
- Fast curing
Handling time by the open time about 1 min after application : About 1-2 min./23°C
Handling time by the open time about 2 min after application : About 30 sec.-1 min./23°C
Good low-temperature curing - Environmental countermeasure products
Avoidance of 14 substances formulated based on the guidelines of the Ministry of Health, Labour and Welfare
No poisonous and deleterious substances
Voluntary registration of products not subject to formaldehyde by the Japan Adhesive Industry Association [Conformity to JAIA F☆☆☆☆･4VOCStandards]
RoHS Compliant products - High durability
Excellent thermal shock resistance and high durability
Cemedine SX720 Flame-Retardant Elastic Adhesive for Electronic Devices
Features
- Non-flammable product (UL94V-O listed).
- One-part elastic adhesive capable of curing at room temperature and humidity.
- Quick initial adhesion, high tack power for various types of materials, and excellent durability.
- Safe and global environment-friendly adhesive.
No halogen-based, antimony oxide, nor phosphorus-based materials is used.
Designated 14 chemical substances under the guideline of the Ministry of Health, Labour and Welfare are not used. - Siloxane-free
Do not use low molecular weight cyclosiloxane.
*D3 to D10 Cyclosiloxane compound
Usage & Applications
- Fixing of circuit boards such as condenser and coil
- Sealing of power supply and transformer for insulation
- Sealing of electronic components for waterproofing
Cemedine Products List
| Type | Product Name |
|---|---|
|
Super X (Standard) |
Super X 8008 |
|
Super X No.777 |
|
|
Polyproprene Use |
SX-PPK1000 (EXP) |
|
Primer PP7F |
|
|
Electrical Component Use |
SX720W, SX720WH, SX720B, SX720BH |
|
UV Cure Elastic Adhesive |
SX-UV100A, SX-UV220 |
|
SX-UV400 |
|
|
High Temperature Resistance Elastic Adhesive |
SX7700 |
|
Conductive Adhesive |
SX-ECA48 |
|
Heat Disspative Adhesive |
SX1008, SX1010, RH96L |